Cccam Option For All Satellite Dish Receivers

Cccam Option For All Satellite Receivers. Here we will provide you Cccam cline option for all satellite receivers of famous brands all over the world. One of these methods will surely work on your satellite receiver.

Cccam Option For All Satellite Dish Receivers

Cccam Option For All Receivers

Try these methods one by one on your receiver and one will surely work for you. We will provide you all popular Cccam Cline methods which are valid for different satellite receivers models of Echolink, Neosat, Starsat, Star Track, Tiger receivers, Super Golden Lazer etc.

Method 1

  1. Press the Menu button and go to Installation option.
  2. Now press OK button on CS Protocol option.
  3. Then select Cccam from Protocol Type option.
  4. Now press OK on Server Settings option.
  5. Then press your Cline details and press Exit button on your remote to save your Cline details.
  6. Now press OK button on the Apply option and your Cline is ready for work.

Method 2

  1. Press Menu button and go to Settings and press OK button on System option.
  2. Now press OK button on Child Lock option and Off the Child Lock option.
  3. Then press the Menu button to save the changes.
  4. Now go to System option and press 1 button on your remote to enable Xcam Setup.
  5. Then press OK on Xcam option.
  6. Now go to Sharing option and press OK button.
  7. Then made Active option ON and select Protocol as Cccam.
  8. Now enter Cline detail and press Blue button on your remote to connect the Cline.

Method 3

  1. Press the Menu button and then go to Settings and then press 9999 to enable Protocol option.
  2. Now from the Protocol Type select the Cccam option.
  3. After that press yellow button on your remote.
  4. Now press OK button on the serial No. 1 to add Cline.
  5. Now enter your Cline details and press Exit button to save the Cline details.
  6. Then press the Red button on your remote to connect Cline.

Method 4

  1. Press the menu button on your remote and go to Tools and press 6666 to activate server option.
  2. Now go to Sever option and press Ok button on your remote.
  3. Then go to Protocol option and select the Cccam option.
  4. Now enter your Cline details and press the blue button to save the details of Cline.
  5. Then press the yellow button on your remote to connect the Cline.

Method 5

  1. Press the menu button on your remote and go to Tools and press OK on the Network option.
  2. Now go to Sever option and press Ok button on your remote.
  3. Then go to Protocol option and select the Cccam option.
  4. Now enter your Cline details and press the yellow button on your remote to connect the Cline.

Method 6

  1. Press 8899 on your remote to enable EMU option.
  2. Now press Menu button, go to Setting and press ok on Server Setting.
  3. Then select Server Type as Cccam.
  4. Now enter your Cline details and press the green button on your remote to connect the Cline.

Method 7

  1. Press the menu button on your remote and go to Multimedia.
  2. Now press 1506 keys on your remote to enable Sharing option.
  3. Then in Sharing option go to Active option and change it to On.
  4. Then go to Protocol option and select the Cccam option.
  5. Now enter your Cline details and press the blue button on your remote to connect the Cline.

Method 8

  1. Press the Menu button and go to Access Control.
  2. Now press 2778 button on your remote to open Access Control option.
  3. Then press OK on Key Edit option.
  4. Now press OK on CCCAM.cfg EDIT.
  5. Then on the Empty Serial No. 1 press the Red button on your remote.
  6. Now select Protocol as Cccam and enter your Cline details and press exit button on the remote.
  7. Then press OK button on Serial No. 1 to connect your Cline.

Method 9

  1. Press the Menu button and go to Setting and press OK button.
  2. Now press 2778 button on your remote to open Access Control option.
  3. Now press OK button on Access Control option
  4. Now press OK on Cccam Client Setup option.
  5. Now press OK on CCCAM.cfg EDIT.
  6. Then on the Empty Serial No. 1 press the Red button on your remote.
  7. Now select Protocol as Cccam and enter your Cline details and press exit button on the remote.
  8. Then press OK button on Serial No. 1 to connect your Cline.

Method 10

  1. Press the Menu button and go to Installation option and press OK button.
  2. Now press OK on the Patch Menu.
  3. Then go to Server Settings option and press OK button
  4. Now select Protocol as Cccam and enter your Cline details and press exit button on the remote.
  5. Your Cline will be connected successfully.

Method 11

  1. Press the Menu button and go to the Internet and press OK button on Net Client Config option.
  2. Now select Server 1 and press the yellow button on your remote to add new Cline.
  3. Before adding Cline select Emulator as Cccmd.
  4. Now select OK on Active Server and EMM Enable option.
  5. Then press Red button on your remote to save Cline entries.
  6. Now your Cline will connect successfully.

Method 12

  1. Press 6677 from your remote to enable CC option.
  2. Now press the Menu button and go to TV Manager option and press OK button on Server Setting option.
  3. Now select Server Type as Cccam and enter your other Cline details.
  4. Then press the green button on your remote to connect Cline.
  5. The Cline will be connected in few seconds.

Method 13

  1. First of all press the Info button on your remote and then press 111.
  2. The UART Mode List will be enabled, now press ok button on Enable Internet option.
  3. Now press the Menu button on your remote and go to Expansion option and press OK.
  4. Then go to Server option and press OK.
  5. Now select server type as Cccam before adding Cline.
  6. Then enter your Cline details and press OK button on Confirm option.
  7. Your Cline will be connected in few seconds.

Method 14

  1. First of all press the F1 button on your remote and then press 111.
  2. The UART Mode List will be enabled, now press ok button on Enable Internet option.
  3. Now press the Menu button on your remote and go to Network option and press OK.
  4. Then go to Server option and press OK.
  5. Now select server type as Cccam before adding Cline.
  6. Then enter your Cline details and press OK button on Confirm option.
  7. Your Cline will be connected in few seconds.

Method 15

  1. Press the Menu button and then and then press 2020 to enable FCAS option.
  2. Now press OK button on Tools option and then press OK on CAS option.
  3. Then press OK on FCAS option and further press OK button Network Sharing option.
  4. Now go to Cccam Servers and press OK button.
  5. Then press OK on the Server 1 option.
  6. Now enter your Cline details and press exit button on your remote to save the Cline.

Method 16

  1. Press the menu button and go to Settings and press OK.
  2. Now go to System Settings and press OK on FCAS MMI option.
  3. Then press OK on FCAS option and further press OK button Network Sharing option.
  4. Now go to Cccam Servers and press OK button.
  5. Then press OK on the Server 1 option.
  6. Now enter your Cline details and press exit button on your remote to save the Cline.

Method 17

  1. Press the Menu button and then go to tools and then press 8888 to enable Share Cam Setting option.
  2. Now Press OK on Share Cam Setting option.
  3. Then press OK on Cccam option.
  4. Now select Server No. 1 and enter your Cline details.
  5. Then press OK on Login option to connect your Cline,

Method 18

  1. Press Menu go to System Setup and press OK button on Cccam Settings.
  2. Now enter your Cline details and press OK button on Login to continue option.
  3. Your Cline will be connected in few seconds.

Method 19

  1. Press the menu button on your remote and System Setup and press 6666 to activate server option.
  2. Now go to Sever option and press Ok button on your remote.
  3. Then go to Protocol option and select the Cccam option.
  4. Now enter your Cline details and press the yellow button to save the details of Cline.
  5. Then press the blue button on your remote to connect the Cline.

Method 20

  1. Press the menu button on your remote and go to Network and then press OK on the Server option.
  2. Now select Protocol Type as Cccam.
  3. Then enter your Cline details and press the blue button on your remote to save Cline.
  4. Now press the yellow button on your remote to connect your Cline.

1 thought on “Cccam Option For All Satellite Dish Receivers”

Leave a Comment

Your email address will not be published. Required fields are marked *